Guildline Instruments
Product by Guildline Instrument
3210T Thermometry Auto-Switch with Pre-Heat
0
PRODUCT FEATURES
- Connect up to 8 PRT’s/SPRT’s at One Time
- Supports Non-SPRT Probes or Devices With Currents Other Than 1 mA
- Programmable Pre-Heat Currents From 20 µA to 150 mA
- Pre-Heat Available and Set-able on an Individual Channel Basis
- Ideal for Use with Fixed Points and Comparison Furnaces
- 5 Way Front Panel Connectors Allow Easy For Banana Connectors and Spade Lugs
- Multiple Interfaces Can be Integrated
- Front Panel Operator Connection with Touch Screen Control
5030 SERIES HIGH PRECISION VARIABLE TEMPERATURE AIR BATHS
0
- Excellent Temperature Stability, Better Than 0.015 °C over 24 Hours!
- Cooling Capacity up to 6 °C Below Ambient!
- Temperature Range 15 °C to 50 °C!
- Dual Fan – Forced Air Circulation Ensures Uniform Temperature!
- Large Volume Enclosure – Over 82 Liters!
- Enclosure is Fully EMI Shielded!
- Convenient Front Access Door. Side Access Hole for Cables and Probes!
- Perfect for Checking Temperature Coefficients of Precision Air Resistors!
- 5032 Fully Programmable Via the IEEE-488.2 or RS 232 Standard Interfaces!
5600 SERIES HIGH PRECISION FLUID/OIL BATHS
0
PRODUCT FEATURES
- NEW Guildline Design and Metrology Based Features!
- Full Automation Via Windows 10 Laptop Computer (USB, IEEE)!
- Excellent Temperature Stability Low As:
±0.0015 K with Oil!
±0.001 K with Water! - Fluid Temperature Range -5 °C to 55 °C!
- Designed for use with Oil, Salt Water, Water, and other Fluids!
- Customer Choice of 4 Tank Sizes: 50 L, 75 L, 100 L and Now – NEW 300 L Model!
- Fiberglass Tank with Proprietary EMI Shielding!
- Convenient Access with Removable Tank Cover!
- Excellent Control via a PRT Sensor!
- 2nd Probe Included to Report Actual Temperature Anywhere in the Bath!
- Automatic and Programmable Over and Under Temperature Protection!
6520 INTELLIGENT TERAOHMMETER
0
PRODUCT FEATURES
- Resistance Mode: Range 100 kΩ to Over 10 PΩ
- Current Mode: Range 10 µA to 100 fA
- Automatic Sensing of Resistance Range, Integration Time and Threshold Voltage
- Surface and Volume Resistivity Measurements with 65221 Test Fixture
- Test Voltages 1 V to 1000 V
- Environmental Monitoring with 65220 Sensors
- Logging, Graphical Display and Analysis of Measurements
- SofCal™ for On-Board Intelligence and Front Panel Calibration
- TeraCal™ Data Acquisition Software Automates Operation
- SCPI compliant IEEE-488.2 and RS232C Built-In as Standard
- Rear Input Option
6535 HIGH TO ULTRA HIGH RESISTANCE MEASUREMENT SYSTEM
0
PRODUCT FEATURES
- Two Modes of Operation, Bridge Mode and Direct Measurement
- Standard Base Resistance Measurement from 1MΩ to 100 TΩ
- eXpanded Resistance Measurement Range from 100 kΩ to 20 PΩ
- eXpanded Performance (and Range) @ 8 ppm for 1 MΩ to 1 GΩ & < 50 ppm for 10 GΩ to 1 TΩ
- Highly Controlled Temperature Environment Ensures Reliable Measurements
- Transfers Traceability of Primary Standards from NMI’s or Other Sources
- Multi-Ratios up to 1000:1 in Bridge Mode
- Test Voltages from 1 to 1000 Volts
- Optional Current Mode to measure currents from 10-2 to 10-13 A
- Scanner Capabilities to 1000V and 64 Channels
- Automated procedures for Calibrating High Resistance Decade Boxes
- Surface and Volume Resistivity Measurements with optional Test Fixtures
- Simple Artifact Verification Procedure Ensures the 6535 Remains within Specifications
6622T TEMPERATURE BRIDGE
0
PRODUCT FEATURES
- Accuracy to 0.025 mK (i.e. best uncertainty at 0.1 ppm)
- Extended Performance (XP) Model Provides Best Accuracy at 0.013 mK (i.e. best uncertainty at 0.05 ppm)
- Wide Range From 0.1 Ω ~ 100 kΩ, Supporting a Wide Variety of SPRT’s, PRT’s, and RTD’s
- Resolution: ± 0.1 ppb of Full Scale and Linearity: ± 0.01 ppm of Full Scale
- Built in Temperature Conversion for ITS-90 and IPTS-68
- Graphical and Statistical Display
- Wide Range of Ratios: 0.1:1 ~ 100:1
- Fully Programmable IEEE 488.2 with BridgeWorks™ Data Acquisition Software
6623A SERIES DCC BRIDGE “HIGH CURRENT” RANGE EXTENDERS
0
PRODUCT FEATURES
- Unique Guildline PATENTED Design
- Dual Design – Extender and Precision DC Source
- Design Includes Built-in Current Source with Electronic Polarity Switching
- Automatic Load Balancing
- NO External Power Supplies Required
- NO Need for any Mechanical Reversing Switches and Compressed Gas
- Advanced Modular Design, Over 64 Expandable Outputs in 150 A Increments to 10,000 Amperes, Investment Protection
- Linearity: ± 0.01 ppm of Full Scale
- Extended Low End Range Down to 0.1 µΩ
- Output Current Stability Typically < 10 ppm for 1000A and Higher – Best in the World!
- Programmed from 6622A Series Bridge
- Unique USB Programmable Controller (model 66259) Allows 6623A to be Used as Stand-Alone Precision DC Current Source
- Safety (Fault) Protections in Place
- Complete Shunt Measurement Systems Available
6624CT-3000 PRECISION DC HIGH CURRENT TRANSFORMER
0
PRODUCT FEATURES
- High Precision DC Current Measurements to 3000 Amperes!
- Fixed Permanent Accuracy (Coil)!
- Measurement Accuracies as Low as 10 ppm!
- Stability Measurement as Low as 3 ppm!
- All Cabling and Leads Included!
- 3 Primary ranges (300, 1500 and 3000 Amperes)!
- Compatible with Guildline Series of Precision Current Sources, or any Customer’s Current Source!
- Optional 66259 Provides Automation for Use with Guildline Precision Current Sources!
- Prewired and Configured for Customers Nominal Power!
6625A Resistance and Current Measurement System
0
PRODUCT FEATURES
- Complete Turn-Key System – Fully Integrated, Wired, Tested and Ready-to-Use
- Widest Available Resistance Range from 1 μΩ ~1 GΩ with Internal Voltages to 1 kVdc
- Precision Current Sources / Range Extension from 3 A to 10,000 A with Built-In Precision Current Source and Electronic Switching
- Wide Range of Ratios: 0.1:1 ~ 100:1, and Up to 2,000,000:1 and More with Range Extension
- Full 10.5 Digits (0.1 ppb) Display Resolution
- Resolution: ± 0.1 ppb of Full Scale
- Unique Measurement Results and Trending Display
- Includes Manual and Automated Operation
- Modular Design, Expandable Capabilities, Investment Protection
- Change Key parameters “On-the-Fly” While Measurements are Running in Manual and Automated Modes
- Internal Temperature Bridge Option Available
- BridgeWorksTM Data Acquisition Software
- Unique Calibration Support Strategy
6625T Temperature Measurement System Asynchronous Power
0
PRODUCT FEATURES
- Complete Turn-Key System: Fully Integrated, Wired, Tested and Ready to Use
- 0.025 mK, 0.013 mK and 0.005 mK Uncertainties available
- Wide Range of Ratios: 0.1:1 ~ 100:1
- Resolution: ± 0.1 ppb of Full Scale
- Unique Measurement Results and Trending Display
- Includes Manual and Automated Modes of Operation
- Modular Design, Expandable Capabilities, Investment Protection
- BridgeWorksTM Data Acquisition Software
- Unique Calibration Support Strategy
- Change Key parameters “On-the-Fly” While Measurements are Running in Manual and Automated Modes
- 2 Year Warranty Standard on Complete System
6636 Temperature Stabilized Resistance Standards
0
PRODUCT FEATURES
- Resistance Range: 10 MΩ to 100 TΩ In Single Decade Increments
- Temperature Coefficients as low as ± 0.2 ppm/°C
- Stabilities as low as < 6 ppm/year
- N-Type Design Ensures Low Noise Connections
- Eliminates Air and Oil Bath Requirements
- Ambient Temperature Range: 23 °C ± 5 °C
- Internal PRT Stability: ± 0.02 °C / Year
- Custom Internal Temperature Set Points
- Low Thermal EMF’s – Shielded Chamber
- Temperature Regulation: ± 0.01 °C Over a 1 Year Period
- Guarded Resistance Element Chamber
- Custom Values / Models Available
- CE Marked with World-Wide Voltage and Frequencies Available
6640Q QUANTUM HALL RESISTANCE (QHR) BRIDGE
0
PRODUCT FEATURES
- New Patented Torroid Design
- New Dual Processor Design
- New Dedicated High Speed Real-Time Processor For Fast Measurements
- New Built-in Windows 10 Computer and Touch Screen Display Providing Complete Measurement Results and Graphs
- Best Accuracy: ± 0.015 ppm of Reading at QHR currents of 30 µA – 100 µA with Interchange
- Does NOT Require an Annual Calibration
- Fasted Measurement Speed of 2 Seconds
- Change All Key parameters “On-the-Fly” While the Measurement is Running
- Linearity: ± 0.005 ppm of Full Scale
- Resolution: ± 0.0001 ppm of Full Scale
- Fully Programmable USB, IEEE 488.2
- Industry Standard SCPI Programming Command Language
- BridgeWorksTM Data Acquisition Software
- Unique Calibration Support Strategy
- Complete Automated Measurements
- Quantum Hall Turn-Key Systems Available