Primary Electrical Metrology
3210T Thermometry Auto-Switch with Pre-Heat
0
PRODUCT FEATURES
- Connect up to 8 PRT’s/SPRT’s at One Time
- Supports Non-SPRT Probes or Devices With Currents Other Than 1 mA
- Programmable Pre-Heat Currents From 20 µA to 150 mA
- Pre-Heat Available and Set-able on an Individual Channel Basis
- Ideal for Use with Fixed Points and Comparison Furnaces
- 5 Way Front Panel Connectors Allow Easy For Banana Connectors and Spade Lugs
- Multiple Interfaces Can be Integrated
- Front Panel Operator Connection with Touch Screen Control
6520 INTELLIGENT TERAOHMMETER
0
PRODUCT FEATURES
- Resistance Mode: Range 100 kΩ to Over 10 PΩ
- Current Mode: Range 10 µA to 100 fA
- Automatic Sensing of Resistance Range, Integration Time and Threshold Voltage
- Surface and Volume Resistivity Measurements with 65221 Test Fixture
- Test Voltages 1 V to 1000 V
- Environmental Monitoring with 65220 Sensors
- Logging, Graphical Display and Analysis of Measurements
- SofCal™ for On-Board Intelligence and Front Panel Calibration
- TeraCal™ Data Acquisition Software Automates Operation
- SCPI compliant IEEE-488.2 and RS232C Built-In as Standard
- Rear Input Option
6530 TERAOHM BRIDGE-METER SERIES
0
PRODUCT FEATURES
- Bridge Mode and Direct Measurement Mode of Operation
- Resistance Range 100 kΩ to Over 10 PΩ
- Bridge Mode Multi-Ratios up to 1000:1
- Test Voltages 1 to 1000 Volt
- Optional DC Current Measurement Range 10 μA to 100 fA
- Existing 6520’s can be Upgraded to any of the four NEW 6530 Models
- Automatic Ranging for Resistance, Integration Time and Threshold Voltage
- Better Performance & More Functionality than Commercially Available Dual Source Bridges
- Surface and Volume Resistivity Measurements with 65221 Test Fixture
- Environmental Monitoring with 65220 Sensors
- Logging, Graphical Display and Analysis of Measurements
- Sofcal™ for On-Board Intelligence and Front Panel Calibration
- Automation of Multiple Measurements with NEW Guildline 6564 Resistance Scanner
- TeraCal™ Data Acquisition Software Automates Operation
- SCPI compliant IEEE-488.2 and RS232C Built-In as Standard
- Rear Input Option
6535 HIGH TO ULTRA HIGH RESISTANCE MEASUREMENT SYSTEM
0
PRODUCT FEATURES
- Two Modes of Operation, Bridge Mode and Direct Measurement
- Standard Base Resistance Measurement from 1MΩ to 100 TΩ
- eXpanded Resistance Measurement Range from 100 kΩ to 20 PΩ
- eXpanded Performance (and Range) @ 8 ppm for 1 MΩ to 1 GΩ & < 50 ppm for 10 GΩ to 1 TΩ
- Highly Controlled Temperature Environment Ensures Reliable Measurements
- Transfers Traceability of Primary Standards from NMI’s or Other Sources
- Multi-Ratios up to 1000:1 in Bridge Mode
- Test Voltages from 1 to 1000 Volts
- Optional Current Mode to measure currents from 10-2 to 10-13 A
- Scanner Capabilities to 1000V and 64 Channels
- Automated procedures for Calibrating High Resistance Decade Boxes
- Surface and Volume Resistivity Measurements with optional Test Fixtures
- Simple Artifact Verification Procedure Ensures the 6535 Remains within Specifications
6564 SERIES 8 AND 16-CHANNEL, HIGH TO ULTRA-HIGH RESISTANCE SCANNERS
0
PRODUCT FEATURES
- Thermoelectric Potentials: < 20 nV
- Contact Life: @10,000,000 Cycles
- Withstands up to 1000 Vdc Providing Fully Automated Resistance Measurements
- Measurements from 100 kΩ to 10 PΩ with No Guarding Required
- Fully Automates Transfer or Bridge Measurements
- Very Low Leakage that Can be Easily Characterized
- Front Panel or Remote GPIB Control
- 2 Terminal Switching Matrix, 8 or 16 Channels
- 8 Channel is Upgradeable to 16 Channels
- N-Type Coaxial Terminals
- Front Panel Indication of Selected Channels
6622A SERIES DIRECT CURRENT COMPARATOR RESISTANCE BRIDGE
0
PRODUCT FEATURES
- Widest Available Range from 1 mΩ ~1 GΩ
- Best Accuracy: ± 0.015 ppm of Reading
- Modular Design, Expandable Capabilities, Complete Investment Protection
- Full 10.5 Digits (0.1 ppb) Display Resolution
- Unique Measurement Trending Display
- Provides Measurement Results on Display
- Change All Key Parameters “IN-REAL-TIME” While the Measurement is Running
- Internal Voltages up to 1000 Vdc
- Linearity: ± 0.01 ppm of Full Scale
- Resolution: ± 0.0001 ppm of Full Scale
- Temperature Option Available
- Wide Range of Ratios: 0.1:1 ~ 100:1
- Extended Low End Range Down to 1 μΩ with Currents Up to 10,000 A
- Range Extenders in 150 A Increments with Built-In Power Supplies and Electronic Switching
- Fully Programmable IEEE 488.2
- BridgeWorksTM Data Acquisition Software
- Unique Calibration Support Strategy
- Complete Measurement Systems Available
6623A SERIES DCC BRIDGE “HIGH CURRENT” RANGE EXTENDERS
0
PRODUCT FEATURES
- Unique Guildline PATENTED Design
- Dual Design – Extender and Precision DC Source
- Design Includes Built-in Current Source with Electronic Polarity Switching
- Automatic Load Balancing
- NO External Power Supplies Required
- NO Need for any Mechanical Reversing Switches and Compressed Gas
- Advanced Modular Design, Over 64 Expandable Outputs in 150 A Increments to 10,000 Amperes, Investment Protection
- Linearity: ± 0.01 ppm of Full Scale
- Extended Low End Range Down to 0.1 µΩ
- Output Current Stability Typically < 10 ppm for 1000A and Higher – Best in the World!
- Programmed from 6622A Series Bridge
- Unique USB Programmable Controller (model 66259) Allows 6623A to be Used as Stand-Alone Precision DC Current Source
- Safety (Fault) Protections in Place
- Complete Shunt Measurement Systems Available
6623A-PCS SERIES DC PRECISION “HIGH CURRENT” SOURCES / RANGE EXTENDERS
0
PRODUCT FEATURES
- Unique PATENTED Design
- Precision DC currents up to 10,000 Amperes
- Output Current Stability < 10 ppm for 1000 A and higher, Typically < 5 ppm
- Programmable from 66259 USB Controller, or from 6622A Series Bridges
- Modular Design, Expandable Capabilities in150 A Increments – Investment Protection
- Built-in Single-Source Output Current with Electronic Polarity Switching
- Eliminates Need for Mechanical Polarity Reversing Switches and Compressed Gas
- Linearity: ± 0.01 ppm of Full Scale
- Safety (Fault) Protections in Place
- Complete Measurement Systems Available
- Ideal for Calibrating DC Power Supplies and DC Shunts
6624CT-3000 PRECISION DC HIGH CURRENT TRANSFORMER
0
PRODUCT FEATURES
- High Precision DC Current Measurements to 3000 Amperes!
- Fixed Permanent Accuracy (Coil)!
- Measurement Accuracies as Low as 10 ppm!
- Stability Measurement as Low as 3 ppm!
- All Cabling and Leads Included!
- 3 Primary ranges (300, 1500 and 3000 Amperes)!
- Compatible with Guildline Series of Precision Current Sources, or any Customer’s Current Source!
- Optional 66259 Provides Automation for Use with Guildline Precision Current Sources!
- Prewired and Configured for Customers Nominal Power!
66252 DMM Switch
0
PRODUCT FEATURES
- Allows System’s Resistance Standards to Be Used as Resistance Sources
- Available In Bench Configurations (No Modification to Existing 6625A Systems)
- Usable Resistance Range 1Ω to 100 MΩ
- Input Impedance >1014
- Use With Any Number of Scanners and Includes Scanner Low Thermal Short
- Includes Lead Compensation Procedures For Low Resistance Connection to Long Scale DMM’s
6625A Resistance and Current Measurement System
0
PRODUCT FEATURES
- Complete Turn-Key System – Fully Integrated, Wired, Tested and Ready-to-Use
- Widest Available Resistance Range from 1 μΩ ~1 GΩ with Internal Voltages to 1 kVdc
- Precision Current Sources / Range Extension from 3 A to 10,000 A with Built-In Precision Current Source and Electronic Switching
- Wide Range of Ratios: 0.1:1 ~ 100:1, and Up to 2,000,000:1 and More with Range Extension
- Full 10.5 Digits (0.1 ppb) Display Resolution
- Resolution: ± 0.1 ppb of Full Scale
- Unique Measurement Results and Trending Display
- Includes Manual and Automated Operation
- Modular Design, Expandable Capabilities, Investment Protection
- Change Key parameters “On-the-Fly” While Measurements are Running in Manual and Automated Modes
- Internal Temperature Bridge Option Available
- BridgeWorksTM Data Acquisition Software
- Unique Calibration Support Strategy
6625T Temperature Measurement System Asynchronous Power
0
PRODUCT FEATURES
- Complete Turn-Key System: Fully Integrated, Wired, Tested and Ready to Use
- 0.025 mK, 0.013 mK and 0.005 mK Uncertainties available
- Wide Range of Ratios: 0.1:1 ~ 100:1
- Resolution: ± 0.1 ppb of Full Scale
- Unique Measurement Results and Trending Display
- Includes Manual and Automated Modes of Operation
- Modular Design, Expandable Capabilities, Investment Protection
- BridgeWorksTM Data Acquisition Software
- Unique Calibration Support Strategy
- Change Key parameters “On-the-Fly” While Measurements are Running in Manual and Automated Modes
- 2 Year Warranty Standard on Complete System