PRODUCTS
9337 Ultra High Value Resistance Standards (1T ~ 10P)
PRODUCT FEATURES
- 12 Month Stabilities Low as 10 ppm
- Wiide Operating Range 18 ° C to 28 ° C
- Resistance Range 10 MW to 100 GW
- Hermetically Sealed
- ISO/IEC 17025 Calibrations Available
- Compact and Ruggedized
- Nominal Initial Accuracy < 2 ppm
- Low Temperature Coefficients
- Voltage Hysteresis < 0.1 ppm
- Rated to 1000V
- Suitable for Calibration of Teraohmmeters Meggers, Long Scale DMM’s, and More…
9340 Series of Decade Resistance Standards
PRODUCT FEATURES
- Widest Available Resistance Range From 10 mΩ to 10 TΩ
- Lowest Available Temperature Coefficients (As low as 5 ppm/°C down to 0.01 Ω)
- Lowest Available Power Coefficients
- 12 Month Stabilities as Low as < 10 ppm (Near Standard Resistor Performance)
- Highest Current Handling Capabilities of Any Decade Standard (7 Amps)
- Smooth Dial Rotation with Stop Position at ‘10’; Each Dial has an Overlap Position at ‘10’ Enabling Fine Tuning
- Special Values Available On Request
- Five Types Available from 3 Dials to 7 Dials; All Full Scale Resistance Values in the Range Available in All Dial Sizes
9340-4T 4 Terminal Decade Resistance Standards / RTD Simulators
PRODUCT FEATURES
- Resistance Ranges include Decades from 1 µΩto 10 kΩ!
- True RTD Simulation with High Decade Resolution!
- Excellent for milli-Ohm and micro-Ohm Applications and Instruments!
- True 4-Wire Terminal Design!
- Accuracy Better than ± 0.01 %!
- Temperature Coefficient Less than 5 ppm/°C!
- Switch and Wiring Resistance Effects of the Four Terminal Arrangement are Less than 10µΩ!
- Direct Reading of Resistance Value at the 4 Terminals!
- Long Life Rotary Switches with Solid Silver Contacts!
- An Overlap ‘10’ Position for Fine-Tuning!
- No Other Decade Standard on the Market Today with these Uncertainties and Low Ohmic Range!
9711B Multi-Value Current Shunts
PRODUCT FEATURES
- Accuracy to ± 0.01 %!
- Rack or Bench Mount Models!
- New Terminals – Better Connections!
- Designed for Maximum Air Flow!
- Enhanced Current and Resistance Markings!
- DC Current Measurement from 10 µA to 300 Amperes Full Scale!
- Compact Design!
- Temperature Coefficient < 10ppm/0C!
99100A CAPACITANCE REFERENCE SYSTEM
PRODUCT FEATURES
- Supports 9910A Capacitance Bridge
- Ratio Transfer Uncertainty Low as 3 ppm
- Better than ±20 ppm Stability
- Calibration Uncertainty ±10 ppm
- Working Voltage to 800 Vrms
- Temperature Coefficients < 4 ppm/°C
- Very Low Voltage Coefficients
- Provides Ratio Calibration from 1:1 to 100:1
- Requires Very Little Maintenance
9910A AC HIGH VOLTAGE CAPACITANCE AND INDUCTANCE BRIDGE
PRODUCT FEATURES
- Better than 15 ppm accuracy, permanent
- Direct reading, six-digit measurements of capacitance from 100 pf to 1000 μF
- Dissipation factor up to 11.1 percent
- Working Voltage to 50 kV with 9911
- Safe to operate, even into Megavolt region
- Bridge components remain at ground potential
- Ideal for measuring low-loss, high voltage, power cables, insulators, transformers, P.F. correction capacitors and reactors
AC Shunt Accessories
AVAILABLE PRODUCTS AND FEATURES
- Forced Air Convection Unit provides excellent heat dissipation and a more stable output!
- AC Buffer Amplifier for low current amplification!
- LC Male to N Female, LC Male to LC Male and LC Female to N Female Adapters available!
- LC to Cable Adapter allows for connection of bare wire and spade lugs for AC Measurements. Fits both 7340 and 7350 Units!
- 73502-30 Serial Connection Adaptor allows for reference measurements using two shunts, with max. current of 30 Amperes! Fits both 7340 and 7350 units!
- For the 7340 Model, the 73502-100 Serial Connection Adaptor allows for reference measurements using two shunts, with max. current of 100 Amperes!
- Adaptor Kit provides 9 different cables and adapters for both models 7340 and 7350, and includes hard storage case!
Air Baths
PRODUCT FEATURES
Air Baths: (+ 15 °C to + 50 °C)
Refined solution for ultra-stable temperature environment 24/7, 365:
• Convenient Front Access – Side Access for Cables & Probes
• Dry, clean, stable, silent, storage for standard resistors
• Keeping the temperature within 10mK over months
• Perfect for checking temperature coefficients
• Peltier driven technology
• Cascade PID control
C300B – Three Phase Power Calibrator and Tester
PRODUCT FEATURES
Our competence can give you only the best:
- High performance: 3x560V, 3x120A (1x360A), class up to 0.02%
- Huge output power and low weight: only 27kg (59lbs) in portable case
- Advanced functions but easy to used
- Manual operations and fully automatic procedures for calibrating and testing
- Professional service and support (it doesn’t matter if you have a complex or trivial issue)
- Low price in comparison to the best performance
Calibration Bath – Black Body Cavity Ready
PRODUCT FEATURES
Black Body Cavity Ready Calibration Bath: (- 20 °C to + 250 °C)
• Perfect solution for calibrating IR thermometers and other thermographic equipment
• Various shapes Black Body Cavities available
• Temperature stability (°C): ± 0.006 @ – 20 °C, ± 0.003 @ 100 °C
• Temperature uniformity (°C): ± 0.007 @ -20 °C, ± 0.007 @ 100 °C
• Fluid ensures perfect heat transfer
• Unique vertical flow design
• Metrology performance
• Two temperature ranges available
• State of the art solution
Calibration Bath – High Temperature
PRODUCT FEATURES
High temperature calibration baths: (+ 40 °C to + 250 °C)
• Temperature stability (°C): ± 0.006 @ 250 °C
• Temperature uniformity (°C): < ± 0.007 @ 100 °C
• Fluid ensures perfect heat transfer
• Up to 500 mm immersion depth
• Unique vertical flow design
• State of the art solution
• Three bath sizes
Calibration Bath – Low Temperature
PRODUCT FEATURES
Low temperature calibration baths: (- 40 °C to + 130 °C)
• Temperature stability (°C): ± 0.004 @ – 40 °C
• Temperature uniformity (°C): < ± 0.007 @ – 40 °C
• Calibrate sensors of any dimension
• Fluid ensures perfect heat transfer
• Up to 500 mm immersion depth
• Unique vertical flow design
• State of the art solution
• Three bath sizes